Questions or Comments?
Please contact us at

We have two temperature modulating stages for use on microscopes.

Water-cooled Peltier Stage

The solid sterling silver cooling/heating stage accepts a 1" by 3" microscope slide or 3" Petri dish. It will maintain specimen temperature as low as -10 degrees C, with an ambient tap water flow of 0.25 liter per minute through the 1/8" tubing connections. The under surface is relieved to accomodate a 1.4na condenser or an objective when used on an inverted microscope. The unit is insulated from the microscope with Teflon strips. It will heat to 50 degrees C or more in heating mode. The power supply is included with this unit.

Air-cooled Peltier Stage temperature stage will maintain a 1" by 3" slide at 12-13 degrees C at an ambient temperature of 20 degrees C. It will also heat to 50 degrees C. Sterling silver heat transfer plates quickly exchange heat to the 14 cm. diameter finned disc which sits on the microscope stage. Not suitable for high n/a inverted microscopes. Power supply included.

Back to Other Products Page